Teledyne Hastings, manufacturer of the original DV-4, DV-5, and DV-6 thermocouple vacuum gauge tubes, produces vacuum measurement equipment with exceptional stability, accuracy, and reliability under the most demanding conditions.
The Teledyne Hastings’ DV-5 series thermocouple vacuum gauge tube/sensor can be paired with a variety of meters or controllers in the DV series to provide reliable, cost effective measurements in a variety of applications. The robust, easy to install gauge system translates a thermoelectric voltage to a vacuum pressure based on the density of the gas. The thermocouple gauge tube/sensor, DV-5, is fully compensated for temperature and rate of temperature change with no suspended weld to an external heater.
The gauges are calibrated for nitrogen or air, but conversion factors for other gases are available from the factory. The thermocouple gauge or controller does not require recalibration when thermocouple gauge tubes are replaced further decreasing process down time. However, our DB-18 reference tube is available to confirm meter/controller performance. Installation accessories are also available from the factory to support your installation needs. One less thing to worry about, when performance matters!
With a wide range of meter, fitting, relay and output options the DV-5 series can support a variety of applications.
Applications and Industries
- Semiconductor Process
- Plasma Coating
We have your solution
- Select your meter/controller (See Chart below)
- Select your gauge tube (See Chart below)
- Place your order – Most parts in stock
|Meter / Controller||VT-5A||CVT-25A||DVT-5||DCVT-5||HPM 4/5/6||DAVC-5|
|Range||0.1 - 100 mTorr |
|Display||Reverse Motion Analog Needle ||Digital ||Setpoint (High/Low) Indicators|
|Units||Torr, mBar, PA |||||||
|Accuracy||||+(20% Reading + 0.2 mTorr) max |
|Dimensions||See Bulletin in Downloads Tab |
|Control Output or Relays||✓||||✓||||✓|
|Power||115 vac; 50/60 Hz current ||90-240 vac; 47-63 Hz, 2W||90-250 vac; 47-63 Hz, 5W||9V Battery|||
|DC Input Requirements||4.5-5.3 VDC, 1.5W||22-25 VDC, 5W|||||
|Power Cable Length||6 Feet |
|Vacuum Sensor Cable Length||8 Feet |
|Extends to 13 Feet||8 Feet - other lengths available|
|Weight||1.3 Lb.||1.5 Lb.||0.5 Lb.||0.7 Lb.||||4.2 oz.|
|Color Band||Red |||
|Dimensions||See Bulletin in Downloads Tab|
|1/8" NPT Threaded Fitting||✓||✓||✓|
|1/4" VCR Male Fitting||✓|||||
|Robust with Protective Cap||||||✓|
|Max Operating Temperature||100oC||150oC|||
|Max Postive Pressure||150 PSIG||400 PSIG|||
|Hermetically Sealed Base with Glass||✓||✓|||
- Gauge Tubes / Reference Tubes / Accessories