Products and Services

​

​​​
​

Thermal Mass Flow Meters and Thermal Mass Flow Controllers for Various Flow Ranges​​​

​
Contact Us  

Teledyne Hastings Instruments brings decades of experience to offer a full line of thermal mass flow meters and mass flow controllers. Our products provide solutions for a wide range of applications which include high and low flow ranges, corrosive gases and very high-temperature environments. With the assistance of our experienced application engineers and global sales network, we will help you find a reliable, repeatable and durable solution for applications in both laboratory and industrial environments. Your needs can be met by using quality flow instruments designed and manufactured by Teledyne Hastings.

 Flow Measure Range.JPG

Solve your application challenges with our trusted line of thermal mass flow meters and thermal mass flow controllers.​

​​Low Flow Products (0-5 sccm to 0-25 slm)


​​Medium Flow Products (0-25 slm to 0-1000 slm)​


​High Flow Products (0-1000 slm to 0-15,000 slm)​​​​

​​​​
​​
CONTACT US FOR MORE INFORMATION 

Picking an Instrument
All Teledyne Hastings mass flow controllers / mass flow meters are configured for your specific conditions. To see available options, refer to the back section of each product bulletins. Some basic considerations when choosing a flow instrument include:
While there are additional factors that should also be considered, such as communication, pressure drop and ambient temperature, these three factors are a great place to start when determining which flow instrument is suited to your application.​

What We Offer

  • Expert first contact
  • Fast and easy product evaluation
  • Customized solutions
  • Design-in support
  • Lifetime application support

Frequently Asked Questions

What does a mass flow controller do?
Mass flow controllers are instruments that measure and control the flow of gas in reference to a specified flow rate. When adjustments in gas flow are required to maintain that rate, the feedback from the sensor is used to create an electronic signal to send to a control valve. Mass flow controllers are calibrated for the flow range over-which they maintain control. A mass flow controller is often used for process control when accurate measurement and control over a process is required.

What’s the difference between a mass flow controller and mass flow meter?
A mass flow meter measures flow using a sensor but does not include a proportional control valve and does not control gas flow. Mass flow controllers both measure and control gas flow, according to a command signal (setpoint). To maintain this rate, the controller measures and adjusts the gas flow using a precise, proportional control valve.

​​

​​​​​​​​​About Teledyne Hastings

Teledyne Hastings Instruments is a trusted manufacturer of a wide range of quality Vacuum Instruments and Gas Mass Flow Instruments . Our vacuum product line includes the original DV-4 and DV-6 thermocouple gauge tubes, along with other vacuum sensors used in combination with meters and controllers that cover a wide range of vacuum pressure from atmosphere to ultra high vacuum. The gas mass flow line of meters and controllers cover a broad range of flow rates from 5 sccm to 15,000 slm that includes a variety of flexible options for outputs, calibration, and fittings.

​ 

Products

Flow Products

Vacuum ​Products​

Contact Us

804 Newcombe Ave , Hampton, VA 23669, USA
hastings_instruments@teledyne.com
800.950.2468​
757.723.6531​
www.teledynehastings.com

Join Us

​

© Teledyne Hastings Instruments Privacy Policy | Terms of Service​